Exchange Server

How to Add Multiple DNS Servers to Windows Server 2008 Core

Avatar photo
Post author:Written By 71 Comments

After installing Windows Server 2008 Core you may wish to configure a static IP address and DNS servers.  Microsoft guides you through this process using the Netsh command.

Configuring a Static IP Address in Windows Server 2008 Core

Use Netsh to configure the static IP address:

netsh interface ipv4 set address name="Local Area Connection" source=static address=192.168.100.48 mask=255.255.255.0 gateway=192.168.100.254

Configuring the Primary DNS Server in Windows Server 2008 Core

Use Netsh again to configure the primary DNS server address:

netsh interface ipv4 set dns name="Local Area Connection" source=static address=192.168.100.49 primary

Configuring Additional DNS Servers in Windows Server 2008 Core

Use Netsh to configure a secondary DNS server address:

netsh interface ipv4 add dnsserver name="Local Area Connection" address=192.168.100.48 index=2

The static IP and DNS server configuration will now be shown in IPConfig:

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
   Physical Address. . . . . . . . . : 00-0C-29-31-9E-AC
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::1884:ed1b:1548:43be%2(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.100.48(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.100.254
   DNS Servers . . . . . . . . . . . : 192.168.100.49
                                       192.168.100.48
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tags: ,

About the Author

Paul Cunningham

Paul is a former Microsoft MVP for Office Apps and Services. He works as a consultant, writer, and trainer specializing in Office 365 and Exchange Server. Paul no longer writes for Practical365.com.

Comments

  5. mstech 23 Jan 2016 Reply

    Thanks Paul.

  35. arestao 22 Dec 2014 Reply

    it’s so borning to create two process in order to set primary and standby dns.

  63. Rui Miranda 4 Nov 2013 Reply

    >netsh interface ipv4 set dns name=”Wireless Network Connection” source=static address=212.113.191.129 primary

    The configured DNS server is incorrect or does not exist.

    …What gives?

    1. Robert Sanders 1 Nov 2016 Reply

      Its attempting to reach the DNS server after configuring it. This is a normal operation – I run into this issue as well when I point to inaccessible or non-existent DNS when running these commands.

      Confirm you can reach that IP and are allowed to create queries. Might be worth using public like 8.8.8.8 for testing.

  64. bitwalker 27 Mar 2013 Reply

    hi,
    the “index=2” doesn’t work for me, to add an address as a secondary dns. It says that ‘index’ is not a valid argument.

    1. Scott 29 Jun 2021 Reply

      G’day.
      Replying in case anyone else finds this problem. Not that the command is “add” , not “set” when you are specifying index=2

      e.g.:
      netsh interface ipv4 add <—- (not "set" which is when you are setting the primary dns"

  65. hasan 3 Mar 2013 Reply

    hi

    i want to configur core server as adtitional DC how can i make it

    many thanks

  66. Brian 14 Sep 2012 Reply

    Hello, when you run the command ‘netsh interface ipv4 set dnsservers ?’ the “Remarks:” section mentions the use of an ‘addr’ option for specifying a static list of DNS server IP addresses, but doesn’t show an example of the syntax how to use this option! Do you know the proper syntax?

  67. Mike 28 Sep 2011 Reply

    I usually never post comments, but look through the web to try and find adding secondary DNS, and this is the only one that work. Thanks.

  68. Con Stantine 6 Nov 2010 Reply

    well done bro,
    whole hour i was looking this commands….

    good job

Leave a Reply